All-time low: £56.80 on 07/09/2016
The Denver WCT-5003 digital wildlife camera trap is an outdoor motion activated trail camera wildlife camera with night vision that works automatically via motion detection (up to 25 meter detection distance). It can be triggered by any movement in front of the camera, monitored by a sensitive Passive Infrared (PIR) motion sensor. On detection of movement it then automatically captures high quality pictures (up to 12 mega pixels) or records up to 1080p HD video.
Wildlife camera with night vision : From sunrise the unit takes colour photos and video until there is insufficient light (dusk) when it automatically switches over to its infrared night vision using 36 LEDs to ensure you still get great shots or video even at night with little to no light.
Digital wildlife camera : It is easy to use with a 2 inch colour LCD display on the camera. It's water and snow resistant for outside use too with an IP54 rating.
Power : The camera takes 4 or 8 x AA sized batteries to power itself and these can last up to 6 months if the camera stays in standby. The camera has an SD card slot and this can take up to a 32GB memory card for photo and video storage.
Wildlife camera motion activated : On motion detection you can set the camera to record just video or take still photos or take both photos & video. When taking photos you can set the camera to take a burst of photos of up to 9 shots too. It's possible to set a delay on the PIR motion detector so that once it has detected movement it is no longer active for a specified period to ensure that it isn't permanently being set off by a single animal or person. With built in timer it means you can set the camera to only be active during a certain period of the day as well.
Password protection means only you can access your camera.
This is a retired product.